Applying your Shaft Skins
Step 1
Wipe shaft to remove any dirt and debris.
Step 2
Measure your shaft from the ferrule to a half inch past the bottom of the grip. Cut the Shaft Skin accordingly. For narrow shafts, measure from the narrow end of the skin and trim the wider part, for wider shafts measure from the wide end of the skin and cut the narrow part.
Step 3
Remove backing from Shaft Skin and center it on the shaft with light pressure.
Step 4
Starting on one side, apply pressure from the bottom to the top. Complete one side before starting the other.
🎾 How to Apply Your Paddle Skin
1️⃣ Peel it.
Remove the backing from your Paddle Skin.
2️⃣ Find your centre.
Locate the centre of the Paddle Skin and align it with the centre of your paddle’s edge (top middle).
3️⃣ Stick + stretch (side one).
Press firmly at the centre to secure it.
While holding the centre in place, gently pull one side down toward the grip, smoothing as you go.
✨ Don’t worry — Paddle Skins are designed to stretch and fit any paddle size.
4️⃣ Repeat on the other side.
Go back to the centre and repeat the process on the opposite side, pulling and smoothing toward the grip.
Done!
Press firmly along the entire edge to ensure full adhesion — and you’re ready to play in style 😎